Everyone hates seeing scratches on the surface of their car’s body. The worst thing here is that getting scratches is not difficult at all. Moreover, these scratches appear out of nowhere, and they ruin the shine of your car’s paint. However, the good part here is that these scratches can be repaired easily by a professional. So, here we will discuss how to repair the scratches on car body.

Know the level of scratch on the surface of the car.

The first thing that you need to know is what type of scratch is there on the body. It is because the body of the car has different layers of coating, and the scratches vary from layer to layer. The following are the layers:

• The clear coat.

• Paint of the car.

• Primer applied before the paint.

• Bare metal.

For all these levels, the scratches on the clear coat will not catch a fingernail. The scratches on the paint will cause a bit of friction for the fingernail. The scratches on the primer and below it will catch the fingernail.

Different techniques for different levels of scratches:

Now that you know about different types of scratches. Here we will discuss how you can get rid of these scratches.

Level 1-The scratch is only on the clear coat.

If you have the level one scratches on your car, there will be almost no issue whole. You slide the fingernail against the paint. This means that you can cure these types of scratches easily. So, the following are the steps that you need to follow.

• Wash the surface to make it dust-free.

• Apply toothpaste with a damp microfiber towel in a circular motion.

• Repeat the first 2 steps 2 to 3 times.

After this, you will have a scratch-free car surface.

Level 2-The scratch is on the Basecoat.

If the scratch is passing from the clear coat and it is on the base coat, then the toothpaste will not cure it. So, here you need to use some product to remove the scratch. Therefore, you can buy any scratch removal kit and follow the steps.

• Wash the surface to make it dust-free.

• Apply the scratch remover product in a circular motion.

• Wipe off any access.

• Repeat the process 2 to 3 times.

Make sure that you do not let the product dry during the process and you will have a great scratch-free surface.

Level 3-The scratch has reached the primer layer.

If the scratches are on the primer layer you will need to paint the surface. In this case, you need to follow the following steps.

• Sand a small area around the scratches. Start from low and end at higher grit sandpapers.

• Apply the primer 2 to 3 times and then sand again.

• Paint the surface with desired color 3 to 5 times and sand finely again.

• Apply the clear coat.

• Apply the car body wax.

After these steps, you will have a scratch-less car body.

These are the steps that you need to follow to repair the scratches on your car’s body. But all of these techniques need to be done by a professional and by special tools. So for repairing any type of scratch or damage in any level it’s highly recommended to let an auto body repair shop get it done for you, otherwise you may damage the car’s body paint.